Micro-abrasive dust: dirtier than dirt
itself.
All around us, there are particles in the air
that are much smaller than dirt, yet they account for as much as 85% of all
engine damage. These particles are less than 20 microns in size, and are
known as
micro-abrasive dust. Micro-abrasive dust consists of tiny silicone
particles that severely damage engines and drastically shorten the life of
filters. Worst of all, these nearly-invisible particles are everywhere, not
just in extreme environments. It's no wonder that the filter industry is
researching solutions to combat micro-abrasive dust, it is quickly becoming
recognized as the single most deadly contaminant to todays precision
engines.
Micro-abrasive
dust kills engines.
Micro-abrasive dust particles are extremely
abrasive. They have razor-like flakes that grind and gouge surfaces, alter
clearances, and generate even more abrasive debris. They are drawn into the
engine through the air intake and destroy critical precision parts.
Micro-abrasive dust wreaks havoc on your equipment, your high-tech filters,
and your livelihood. Its particles drastically degrade engine performance
and increase fuel-consumption. Not even dual-stage filters can stop these
devastating particles.
The choice is yours...either stop micro-abrasive dust, or it will stop
you.
Quite simply, if you
are not stopping micro-abrasive dust, you can expect to pay dearly. In
addition to jeopardizing your engine, you are going to
waste expensive filters and fuel. You will also have higher maintenance costs,
more downtime, and a bundle of otherwise avoidable warranty claims.
So what can you do to protect your livelihood?
There is only one product on the market that
is exclusively engineered to eliminate deadly micro-abrasive dust before it
enters the filter, the turbo Precleaner. No other precleaner can make this
claim. Regardless of how you may be combating dirt today, the turbo
Precleaner is the single most critical investment you can make to protect
your engine, and your livelihood.
This is all the more important in the age of
todays precision-engineered Tier III and Tier IV engines. Their tighter
tolerances and lower emissions demand ultra-clean air. Only the turbo
Precleaner can deliver this up-front protection.
When it comes to
protecting your engine, there is only one target zone that matters. Either
your engine is protected from micro-abrasive dust, or it is not. Like a seat
belt, there is no "in
between." Unless you have the turbo Precleaner, you may as well have no
protection at all.
The turbo's top-through airflow creates the velocity
needed to centrifugally separate micro-abrasive dust particles.
No
stop-and-go, bottom-through precleaner can match the turbo's raw power and
sheer effectiveness at stopping destructive dust. In test after test, the
turbo has exceeded all other precleaners in the sheer power and efficiency
of its exclusive top-through-airflow design. This design is so efficient,
that after thirty years, no other precleaner has even come close.
If it's not
the genuine turbo, it's just a raincapTM.
There are two kinds of people in
this profession - those who use the turbo Precleaner, and those who wish
they had.TM
If your precleaner is not the genuine turbo, your very
livelihood is vulnerable to the deadliest contaminants on earth. Upgrading
to the turbo is not only the smartest choice you can make - it's the only
choice.
Is the turbo worth the investment?
...Try the cost of not having one
turbo pre-cleaner literature
(Adobe Reader required to vie documents.
Click here to download)
Employee Email Access