What's New

Fuel Filtration - Biodiesel

The 300RC Series filters are designed to help heat Biodiesel blends and summer diesel for use in cold weather. They feature a unitized mounting head with a highly efficient heat exchanger. Hot engine coolant is used to raise the fuel temperature up to 60 deg. F. Coolant flow is controlled with customer supplied shut-off valves. A standard electric heater helps pre-heat the fuel before engine coolant reaches operating temperature. All filter materials and seals are compatible with ultra-low sulfur diesel (ULSD) fuel and B2 to B20 Biodiesel. Features and benefits include two stage filtration using engineered Aquabloc II media (known around the world for its combination of high efficiency, long life, and unsurpassed water removal performance), a clear bowl for water and particle detected, up to 60 deg. F fuel heat rise, standard electric pre-heater, optional water-in-fuel sensor, and vacuum indicators to signal filter restriction. The 300RC series comes in three flow rates: 390RC (90 GPH), 360RC (60 GPH), and 345RC (45 GPH).

Fuel Filtration - Filter Pumps

The Turbine Series Electric Primer Pump Kits can be retrofitted to many of the Racor 900FH or 1000FH Series fuel filters already in service. The Filter Pump is an innovative and proprietary system consisting of a pre-screen filter, a flow bypass circuit and a roller cell pump powered by a DC motor. When the switch is activated the fuel is drawn into the pre-screen and then is pumped through the housing, refilling the unit with fuel. When not in use the Filter Pump system is bypassed and the Racor fuel filter water separator functions normally. The use of this primer pump kit allows the operator to easily re-prime a Racor Filter/Separator directly from the fuel storage tank with no mess.

The RKP1912, 12V DC Kit, contains a traditional brushed motor design.
The RKP1924, 24V DC Kit, contains innovative brushless motor technology.

Marine Fuel Filtration

When engines demand heavy-duty, high-capacity water separation and fuel filtration, the Marine Turbine Series is the most complete, efficient and reliable engine protection you can install.

Symbolizing Racors continuing commitment to the science of filtration, the Marine Turbine Series has established its position as the filter/separator often imitated, but never equaled.

Models that include an aluminum bowl or stainless steel shield meet ASTM FS1201 certification, are UL listed, American Bureau of Shipping, Veritas, Det Norske Veritas, ISO 10088 and U.S.C.G. accepted. For severe service, all-metal bowls should be specified.